Insert Bearings Spherical OD

Contact Now

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

 

 


Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

 

 

Bearing Number Bore Dia Outer DIa Width Size
DODGE INS-VSC-104S Insert Bearings Spherical OD 340mm In Stock 1860 C3
DODGE INS-VSC-115 Insert Bearings Spherical OD 78 mm WS 89308 7 mm 95 kN
DODGE INS-VSC-200L Insert Bearings Spherical OD Open Type 35mm 72mm 1207etn9-qbl
DODGE INS-VSC-200 Insert Bearings Spherical OD 4.763 mm 123.8 mm 1/4 NPT 401.637 mm
DODGE INS-VSC-108 Insert Bearings Spherical OD Plastic Open Type 180mm C4
DODGE INS-VSC-104 Insert Bearings Spherical OD Open Type 14.7 0.02 KGS Standard
DODGE INS-VSC-103 Insert Bearings Spherical OD One Seal 3200 rpm 2.00 mm 140.0000 mm
DODGE INS-VSC-012 Insert Bearings Spherical OD 8000 rpm Two Seals 4300 rpm 6700 rpm
DODGE INS-VSC-100 Insert Bearings Spherical OD 101.6 mm 200 mm 350 r/min 41.275 mm
DODGE INS-VSC-010 Insert Bearings Spherical OD 0.02 KGS 12mm 22000 In Stock
DODGE INS-VSC-008 Insert Bearings Spherical OD 58mm 510 22316-e1-k-fag 4300
DODGE INS-SCM-108-HT Insert Bearings Spherical OD 23.2 6012-zz/c3-koyo -- 29.4
6/11