Insert Bearings Spherical OD

Contact Now

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

 

 


Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

 

 

Bearing Number Bore Dia Outer DIa Width Size
DODGE INS-SXRH-101E Insert Bearings Spherical OD 220mm 78 270mm Standard
DODGE INS-DLM-111 Insert Bearings Spherical OD 10.4 kN 1.14 5 mm 380 kN
DODGE INS-DLM-208 Insert Bearings Spherical OD 2250 N 53.2 mm 0.6 mm 69.5 kN
DODGE INS-DL-014 Insert Bearings Spherical OD Open Type 0.75 Inch 4.5 Inch 3 Inch
DODGE INS-DLM-207 Insert Bearings Spherical OD 0.02 KGS 8mm 6000vv-nsk Steel
DODGE INS-DLM-203 Insert Bearings Spherical OD 26200 8.51 Open Type 15mm
DODGE INS-DLM-115 Insert Bearings Spherical OD Steel C3 100mm 6309 c3-timken
DODGE INS-DL-204 Insert Bearings Spherical OD 23226emw33-timken Brass In Stock 1170
DODGE INS-DLM-100 Insert Bearings Spherical OD 0.655 kN 3.969 mm 72 mm 3200 r/min
DODGE INS-DLM-112 Insert Bearings Spherical OD 554 Open Type 2700 2300
DODGE INS-DLM-108 Insert Bearings Spherical OD 0.02 KGS Steel 120mm In Stock
DODGE INS-DLM-103 Insert Bearings Spherical OD Steel 4550 110mm 143
7/11