Insert Bearings Spherical OD

Contact Now

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

 

 


Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

 

 

Bearing Number Bore Dia Outer DIa Width Size
DODGE INS-DLM-107 Insert Bearings Spherical OD 49.2mm In Stock Standard 150mm
DODGE INS-DL-200 Insert Bearings Spherical OD 2.00 mm 150.0000 mm 1.00 mm 199000 N
DODGE INS-DL-211 Insert Bearings Spherical OD 6300 rpm Shield & Seal 7500 rpm 29000 N
DODGE INS-DL-207 Insert Bearings Spherical OD 5600 Open Type 45mm 5.8
DODGE INS-DL-203 Insert Bearings Spherical OD 35.80 KGS 23234kejw33c4-timken 170mm In Stock
DODGE INS-DL-115 Insert Bearings Spherical OD 30207-ntn In Stock 5500 Steel
DODGE INS-DL-200S Insert Bearings Spherical OD 95.000 mm 3800 rpm 118000 N 3800 rpm
DODGE INS-DL-112 Insert Bearings Spherical OD 20 mm 0.022 kg 5 m/s 0.1
DODGE INS-DL-111 Insert Bearings Spherical OD 7mm 2.8mm mr72-zen Open Type
DODGE INS-DL-110 Insert Bearings Spherical OD 0.063 kg 0.6 mm 50 mm 55 mm
DODGE INS-DL-108 Insert Bearings Spherical OD 4 mm 12 mm 132 mm 400 mm
DODGE INS-DL-107 Insert Bearings Spherical OD 115.4 mm 107 mm 1.5 mm 138.17 mm
8/11